naxme.blogg.se

After removing the cable between the camera and the printer, press the Resume/Cancel button, andġ0 times: Automatic duplex printing cannot be performed (paper size not supported). In repair servicing, replace the bottom case unit (QM2-1249), or the ink absorbers (QC1-4222 / 4223 / 4224 / 4263 / 4264 / 4864).ĩ times: The connected digital camera or digital video camera does not support Camera Direct Printing. The service call error, indicating the waste ink absorber is full, is likely to occur soon. Pressing the Resume/Cancel button will exit the error, and enable printing. After setting a CD-R or DVD-R in the tray, set the tray in the tray guide, and press the Resume/Cancel button.Ĩ times: Warning: The waste ink absorber becomes almost full (approx. *1 Close the CD-R tray guide, and press the Resume/Cancel button.ħ times:No CD-R or DVD-R. *2 Close the inner cover, and press the Resume/Cancel button.ĬD-R tray guide closed (during CD-R printing).*1 Open the CD-R tray guide, set theĬD-R tray properly, and press the Resume/Cancel button.ĬD-R tray guide open (during printing to paper). Inner cover open (during printing on paper).

*2 Close the inner cover, and press the Resume/Cancel button. Or, with the print head installed, turn the printer off and on.Ħ times: Inner cover open. Install the print head properly, and close the access cover. Pressing the Resume/Cancelbutton will exit the error without ink tank replacement, however, ink may run out during printing.ĥ times: The print head is not installed, or it is not properly installed (EEPROM data of the print head is faulty). Replace the empty ink tank(s), or press the Resume/Cancel button. Open the paper output tray.Ĥ times: No ink. Remove the jammed paper, and press the Resume/Cancel button.įront door closed. Set the paper in the cassette, and press the Resume/Cancel button.ģ times: Paper jam. *1 Set the CD-R tray, and press the Resume/Cancel button. (ASF) Set the paper in the ASF, and press the Resume/Cancel button.No CD-R tray.